Weaving process
Unlike braiding, the weaving process is based on the perpendicular interlacing of threads to form parallel sections. Two types of threads make up the fabric: warp threads (in the length) and weft threads (in the width).
On a loom, the warp threads are held in place, while the weft threads are passed through them, above and below.
The way in which the warp and weft threads are interwoven is called weave. There are different types of weave used around the world to create fabrics.
In the plain weave, the warp threads are lifted alternately and evenly to allow the weft threads to pass. The resulting ribbons have neither back nor front. This is the oldest weaving technique.
In the twill weave, a shift in the weft passage creates a diagonal effect, which makes it possible to create geometric patterns (herringbone, houndstooth, etc.). The resulting fabric can be either even or uneven. Among the best known twills are denim, tweed, gabardine, etc.
In a satin weave, the crossing points between warp and weft are spaced out (every 4 threads or more) so that the surface is smooth and shiny on the front side and matt on the back. Satin is therefore always uneven-sided.
At Gauthier Fils, we have a workshop dedicated to weaving, for ribbon creations. With this equipment, we can create many woven items used in trimmings, such as ribbons, braids, straps, for decoration or for technical use.
In partnership with the company Atiplast, also a member of the Gauthier Group, we offer the installation of plastic tips and hooks by overmoulding, directly onto the ribbon.
